> ## Documentation Index
> Fetch the complete documentation index at: https://docs.myzendo.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Backups

> Zendo backs up your property's setup every week, so you can go back if something is deleted or changed by mistake.

## Intro

Backups keep a copy of your property's setup in Zendo: floorplans, rooms, accessories, shortcuts and wall panel settings. If a floor is deleted by mistake, or a change doesn't work out, you can go back.

Zendo backs up the property automatically every week and keeps the last 20 backups. You can also back up yourself, before a big change, and restore any backup in a few taps.

> [!NOTE]
>
> Backups are available if an installer set up Zendo at your property. Only admins can see the backups, back up and restore.

***

## When you'll use it

* **A floor deleted by mistake**, found out about more than 48 hours later, when it can no longer be restored from "Rooms & Floors".
* **A change that didn't work out**, such as rooms reorganised at home, or a floor of an office or a hotel set up again after building work.
* **Before a big change**, such as redesigning a floorplan or handing the setup over to someone else. Back up first, so you can go back.

***

## What's in a backup

A backup is a copy of the property's setup in Zendo:

* Floors and their floorplans
* Rooms
* Accessories, including [speakers](https://docs.myzendo.com/accessories/media-player.md), [security cameras](https://docs.myzendo.com/accessories/security-camera.md) and [security systems](https://docs.myzendo.com/accessories/security-system.md)
* [Shortcuts](https://docs.myzendo.com/automate/automation-floorplan.md)
* [Location-based automations](https://docs.myzendo.com/automate/geofences.md)
* [Wall panel buttons](https://docs.myzendo.com/permanent-devices/wall-panel-buttons.md) and [widgets](https://docs.myzendo.com/permanent-devices/widgets.md)

A backup doesn't include:

* **People and their access.** Everyone you've [invited](https://docs.myzendo.com/share/invite.md) stays invited, with the same access, whatever you restore.
* **Changes you haven't applied yet.** A backup includes only the changes you've applied with "Done".
* **Anything set up in Home Assistant/Homey itself**, such as its devices and automations.
* **A floor deleted in the last 48 hours.** It counts as deleted from the moment you delete it.

***

## When Zendo backs up

Each backup on the list shows when it was made, and why:

* **Weekly backup**: Zendo backs up the property automatically, once a week.
* **Manual backup**: an admin tapped "Back Up Now".
* **Before a restore**: Zendo backs up the property just before a backup is restored, so the restore can be undone.

Zendo keeps the last 20 backups, whatever made them. Each new backup removes the oldest one, so backing up many times in a row replaces older weekly backups.

***

## See your backups

1. Tap&#x20;
2. Tap "Settings"
3. Tap "About Your Zendo"
4. Tap "Backups"

The newest backup is at the top. Tap a backup to see its floors, with the number of rooms and accessories on each.

***

## Back up now

Back up before a big change, so you can go back if it doesn't work out.

1. Tap&#x20;
2. Tap "Settings"
3. Tap "About Your Zendo"
4. Tap "Backups"
5. Tap "Back Up Now", at the end of the list.

The backup takes a few seconds, then shows at the top of the list.

***

## Restore a backup

Restoring puts the property's setup back to how it was when the backup was made.

1. Tap&#x20;
2. Tap "Settings"
3. Tap "About Your Zendo"
4. Tap "Backups"
5. Tap the backup you want
6. Tap "Restore Everything"
7. Tap "Continue", then "Restore".

Before it restores, Zendo backs up the property as it is, marked "Before a restore". To undo the restore, restore that backup.

A restore usually takes less than a minute. Until it's done, nobody can change the property's setup, but everyone can use the accessories as usual. If you leave the Backups screen, Zendo tells you when the restore is done.

Then every phone, tablet and wall panel at the property switches to the restored setup. A device that isn't connected at the time switches the next time Zendo opens on it.

### What a restore changes

* **The whole setup goes back to the backup.** Everything changed since is undone. You can't restore a single floor or room.
* **People keep their access.**
* **Wall panel buttons and widgets go back to how they were in the backup.** A wall panel or tablet added after the backup was taken has none in it, so its buttons and widgets are removed, and you'll need to set them up again. You can [copy them from another device](https://docs.myzendo.com/permanent-devices/copy-setup.md).
* **Location-based automations go back to how they were in the backup.** Someone invited after the backup was taken has none in it, so the ones they've set up since are removed. Everyone else gets theirs back as they were.

***

## Bring back a deleted floor

Within 48 hours of deleting a floor, restore the floor itself from "Rooms & Floors". Nothing else changes. See [Rooms & Floors](https://docs.myzendo.com/floorplan/rooms-floors.md#add-change-or-delete-a-floor).

After 48 hours, restore a backup made before the floor was deleted. Tap a backup to check its floors before you restore it. Restoring also undoes everything else changed since that backup.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.