> ## Documentation Index
> Fetch the complete documentation index at: https://docs.myzendo.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Change a Wall Panel's Wi-Fi

> Move a wall panel to another Wi-Fi network from your phone or tablet, without going to the panel.

## Intro

Move a wall panel to another Wi-Fi network from your own phone or tablet, without going to the panel. For example, move the panels to a new network before you turn off the old one, or to a [network of their own](https://docs.myzendo.com/permanent-devices/securing-devices.md#network-security), away from the Wi-Fi that residents, staff or visitors use.

The panel keeps the new network only once it can reach your hub (Home Assistant/Homey) on it. If the panel can't join the network, or can't reach your hub there, it goes back to the network it was on by itself, so a wrong password doesn't leave it offline.

To move several panels at once, ask the [AI Assistant](#change-wi-fi-with-the-ai-assistant).

> [!NOTE]
>
> "Change Wi-Fi" is available if an installer set up Zendo at your property. It's only for wall panels: change a tablet's Wi-Fi on the tablet itself.

***

## Before you start

* The wall panel is online, and has the latest version of Zendo and of Zendo Launcher, the app that keeps Zendo on the panel's screen.
* Your hub has the latest version of the Homey or Home Assistant (HACS) integration.
* The new network is on and in range of the panel. From it, the panel can reach your hub, on your local network or over the internet.

***

## Change the Wi-Fi

On your phone or tablet:

1. Tap&#x20;
2. Tap "Settings"
3. Tap "Control Panels"
4. Under its device group, tap the wall panel
5. Tap "Network"
6. Tap "Change Wi-Fi", at the end of the sheet
7. Tap the network to move the panel to
8. Enter the network's password, then tap "Join".

### Choose a network

The panel looks for Wi-Fi networks, then lists the ones it can see, strongest signal first, each with its signal strength.

* The network the panel is on has a tick and "Current network". You can't choose it.
* A network the panel can't join, such as one that needs a username as well as a password, is dimmed and shows "Not supported".
* Hidden networks, which don't broadcast their name, aren't listed, and the panel can't move to one.

Tap "Refresh" to have the panel look again.

### Enter the password

When you tap a network, Zendo asks for its password, and says the panel may go offline for a moment. The password shows as you type it, so you can check it. Wi-Fi passwords have at least 8 characters. An open network doesn't ask for a password.

### Follow the change

The sheet shows each step while the panel moves:

1. "Joining" and the network's name: the panel joins the new network. This can take a minute.
2. "Checking the Connection": the panel is on the new network, and Zendo checks it can reach your hub there. The panel keeps the new network only once it does.

Once the panel keeps the new network, it removes the network it was on before, and only that one. Any other network saved on the panel, such as a [backup network](#change-wi-fi-on-the-panel), stays.

If the panel can't join the new network, or can't reach your hub there, it goes back to the network it was on by itself, within a few minutes.

If the panel couldn't remove the network it was on, "Wi-Fi Changed" says so, and the panel may go back to that network. Turn that network off on your router or access point, or [remove it on the panel](#change-wi-fi-on-the-panel).

***

## Change Wi-Fi with the AI Assistant

Ask Zendo's AI Assistant to move one or more wall panels to another network, such as "Move every panel on the ground floor to the Devices network". It works in the Zendo app, and from AI tools such as Claude that reach Zendo through its MCP (Model Context Protocol) server. It can do this wherever you can use "Change Wi-Fi" yourself.

* **It looks for the network first,** on one of the panels.
* **It asks how to roll out the change.** Before it moves more than one panel, it suggests one panel first, then five at a time. It waits for each batch to finish, and stops after a batch in which a panel didn't switch, so a problem such as a wrong password doesn't reach the other panels.
* **It never sees the password.** Zendo asks for it once, for every panel, in a sheet on your phone or tablet: never in the chat, and never on the panels.
* **It follows each change until it ends,** then tells you how each panel went.

***

## Change Wi-Fi on the panel

Set up a backup network, or fix the Wi-Fi of a panel that can't connect, on the panel itself. On the wall panel:

1. Tap&#x20;
2. Tap "Settings", and enter the [admin code](https://docs.myzendo.com/permanent-devices/securing-devices.md#admin-code) if Zendo asks for it
3. Tap "Device Settings"
4. Tap "Wi-Fi"
5. Tap "Change Wi-Fi Network", or "Connect to Wi-Fi" if the panel isn't on a Wi-Fi network.

This opens the panel's own Wi-Fi settings, where you can join or add a network, such as a backup network, or remove one.

***

## Good to know

* **The password stays private.** Zendo passes it to the panel encrypted, and doesn't store it.

***

## Troubleshooting

* **"Change Wi-Fi" doesn't show**: use your phone or tablet, and check the panel is online. See [Before you start](#before-you-start).
* **"Wi-Fi is off on the device."**: turn on Wi-Fi in the panel's own [Wi-Fi settings](#change-wi-fi-on-the-panel), then try again.
* **"The device is already changing its Wi-Fi."**: a change started from another phone or tablet, or by the AI Assistant, is still running. Wait a few minutes, then try again.
* **"The device can't join this kind of network."**: the panel doesn't support the network's kind of security. Choose another network.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.